command point to point mikrotik


Dari sisi AP commandnya adalah sbb:
[admin@AP]> interface bridge add name=wds-bridge
[admin@AP]> interface bridge port add interface=ether1 bridge=wds-bridge

[admin@AP]> interface wireless set wlan1 ssid=MikroTik frequency=5805 mode=bridge disabled=no
[admin@AP] interface wireless set wlan1 wds-mode=dynamic wds-default-bridge=wds-bridge
[admin@AP] interface wireless wds> print
[admin@AP]> ip address add address=10.1.0.215/24 interface=wds-bridge

Dari Sisi station sbb:
[admin@Station]> interface bridge add name=wds-bridge
[admin@Station]> interface bridge port add interface=ether1 bridge=wds-bridge
[admin@Station]> interface bridge port add interface=wlan1 bridge=wds-bridge
[admin@Station] interface wireless set wlan1 mode=station-wds ssid=MikroTik disabled=no
[admin@Station]> ip address add address=10.1.0.216/24 interface=wds-bridge

2 thoughts on “command point to point mikrotik

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s