Klausa Where Pada Mikrotik


Jadi ceritanya begini saya mau edit limit bandwidth di simple queue mikrotik, nah karena simple queue nya banyak bingung kalo di command line gimana caranya kecuali kalo pake winbox, akhirnya nemu caranya kurang lebih seperti ini :

queue simple print where name~"budi"

Maka akan ke luar keyword yang berkarakter budi kurang lebih seperti ini output nya

Flags: X - disabled, I - invalid, D - dynamic
15    name="pt.budiman center_iix" target-addresses=192.168.7.14/32 interface=all parent=corporate_iix packet-marks=packet-iix direction=both priority=8
      queue=default-small/default-small limit-at=4M/4M max-limit=4M/4M burst-limit=4M/4M burst-threshold=4M/4M burst-time=8s/8s total-queue=default-small

42    name="pt.budiman-center_intl" target-addresses=192.168.7.14/32 interface=all parent=corporate_intl packet-marks=packet-intl direction=both priority=8
      queue=default-small/default-small limit-at=1M/1M max-limit=1M/1M burst-limit=1M/1M burst-threshold=1M/1M burst-time=8s/8s total-queue=default-small

Nah semoga bermanfaat artikel ini untuk agan – agan yang kebinungan bagaimana cara nya.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s